references on steels

Various References on Steels

TAKECHI, H.

New Flat Rolled Steels to be Expected in the Next Decade

Metalurgia International, April 1988, 122-33

ANON

Steel Meets Automotive Requirements

Steel Times Intern., July 1993, 30-4

SAKUMA, Y. et al.

High Strength Steel Utilizing Transformation-Induced Plasticity (TRIP) Effect

Nippon Steel Tech. Rep., Jan. 1995, 20-5

SIMON, R.W.

New Steel Products for the Automotive Industry

Steel Times Intern., Nov. 1997, 44-6/50

MATSUMURA, O. et al.

Retained Austenite in 0.4%C-Si-1.2% Mn Steel Sheet Annealed and Austempered

Tetsu-to-Hagane', Aug. 1991, 1304-12

MATSUMURA, O. et al.

Effects of Retained Austenite on Formabilities of High Strength Sheet Steels

Tetsu-to-Hagane', Aug. 1991, 1312-27

MATSUMURA, O. et al.

Retained Austenite in 0,4C-Si-1,2Mn Steel Intercritically Heated and Austempered

ISIJ International, Sept. 1992, 1014-20

MATSUMURA, O. et al.

Effect of Retained Austenite on Formability of High Strength Sheet Steels

ISIJ International, Oct. 1992, 1110-6

TSUKATANI, I. et al.

100 kgf/mm2 Cold-Rolled Steel with Retained Austenite and Extra-High Ductility

Microalloying '88, A.S.M., 1988, 541-50

MATSUMURA, O. et al.

Effect of Retained Austenite on Deep Drawability in 1000 MPa High Strength Steel

Tetsu-to-Hagane', Feb. 1993, 209-11

SUGITOMO, K. et al.

Second Phase/Retained Austenite Morphology and Properties of TRIP-aided DP Steel

ISIJ International, July 1993, 775-82

HWAN, J. et al.

Deformation/Transformation of Multi-Phase Sheet Steel with Retained Austenite

Tetsu-to-Hagane', June 1993, 665-70

MCALLON, T.P.

Steel - Back in the Driver's Seat

Iron and Steel Maker, Aug. 1993, 23-5

HANZAKI, A.Z. et al.

Continuous Cooling Deformation Testing of Steels

Metallurgical Transactions A, Dec. 1993, 257-65

DREWES, E.J. et al.

New Approaches to the Reduction of Weight and Fuel Consumption in Motor Cars

Stahl und Eisen, Jan. 1994, 43-8

MATTHEWS, A.

Role of Steel in Fuel Efficient Cars

Ironmaking and Steelmaking, 2/1994, 87-92

HUANG, H. et al.

Retained Austenite in Low C-Mn Steel after Intercritical Heat Treatment

Materials Science and Technology, July 1994, 621-6

HANZAKI, A.Z. et al.

Influence of Bainite on Retained Austenite Characteristics in Si-Mn TRIP Steels

ISIJ International, Jan. 1995, 79-85

HANZAKI, A.Z. et al.

Hot Deformation Characteristics of Si-Mn TRIP Steels with/without Nb Microalloy

ISIJ International, March 1995, 324-31

FURUKAWA, T. et al.

Effects of C Content on Mechanical Properties of 5% Mn Steels Exhibiting TRIP

Materials Science and Technology, Oct. 1994, 964-9

KIM, J.Y. et al.

Ultra High Strength Steel Sheet with Transformation Induced Plasticity

49. Congresso Anual da ABM, Sao Paulo, 1994, vol. 8, 117-28

ITAMI, A. et al.

Plastic Stability of Retained Austenite in Cold Rolled TRIP Sheet Steel

Tetsu-to-Hagane', June 1995, 673-8

ZHAO, J. et al.

Controlled Rolling Parameters Effect on Microstructure/Properties of TRIP Steel

Iron Steel (China), 11, 1992, 24-7 (FE 29072, Dec. 1994)

MINOTE, T. et al.

Phase Transformation and Compositional Partitioning in TRIP Steel

Tetsu-to-Hagane', Sept. 1995, 918-23

ITAMI, A. et al.

Plastic Stability of Retained Austenite in Cold Rolled C-Si-Mn Sheet Steel

ISIJ International, Sept. 1995, 1121-7

SUGIMOTO, I. et al.

Warm Stretch-Formability of TRIP-aided Dual Phase Sheet Steels

ISIJ International, Nov. 1995, 1407-14

BRANDT, M.L. et al.

Bainite Stabilization of Retained Austenite and Ductility in Low Alloy Steels

35th. Mechanical Work and Steel Processing, I.S.S., 1993, 427-34

KAWANO, O. et al.

Retained Austenite Formation and Effect on Elongation in Low C Hot Rolled Steels

Tetsu to Hagane', March 1996, 232-7 (ISIJ Intern., March 1996, A-8)

KAWANO, O. et al.

Effect of Stability of Retained Austenite on Elongation in High Strength Steels

Tetsu-to-Hagane', April 1996, 333-7 (ISIJ Int., April 1996, A5)

DREWES, E.J. et al.

Innovative Steel Products for Lightweight Car Body Construction

Steel Times, April 1996, 140-1

NAGASAKA, A. et al.

Warm Forming Effect on Stretch-Flangeability of a TRIP-aided Dual Phase Steel

Tetsu-to-Hagan, May 1996, 335-40 (ISIJ Intern., May 1997, A27)

YUE, S. et al.

Ferrite Formation: Characteristics in Si-Mn Trip Steels

ISIJ International, June 1997, 583-9

OKANO, Y. et al.

Present State and Future Prospects of High Tensile Strength Steel Sheets

Kobe Steel Engineering Reports, Sept. 1997, 38-41

OKANO, Y. et al.

Present State and Future Prospects of High Tensile Strength Steel Sheets

Kobe Steel Engineering Reports, Sept. 1997, 38-41

TOMITA, Y.

Microstructure Effect on Transformation-Induced Plasticity of Si Low Alloy Steel

Materials Characterization, 38/04-05, 1997, 243-50

HU, Z.Z. et al.

The Effect of Austenite on Low Cycle Fatigue in the Three Phase Steel

International Journal of Fatigue, 19, 8-9, 1997, 641-6

GIRAULT, E. et al.

Metallographic Methods to Reveal the Multiphase Microstructure of TRIP Steels

Materials Characterization, 40/2, 1998, 111-8

MAGASAKA, A. et al.

Second Phase Morphology Effect on Warm Flangeability of TRIP-DP Steels

Tetsu-to-Hagane', March 1998, 218-23 (ISIJ Int., March 1998, A8)

GRAESSEL, O. et al.

Phase Transformations and Mechanical Properties of TRIP Steels

4 Eur. Symp. Martens. Transf., Enschede, 1997 (St.Res., Feb. 1998, 72)

BAI, D.Q. et al.

Stability of Retained Austenite in a Nb Microalloyed Mn-Si TRIP Steel

Microalloying in Steels, S. Sebastian, Sep. 1998, 253-62

BOUET, M. et al.

The Effect of Mo in Si-Mn Nb Bearing TRIP Steels

Microalloying in Steels, S. Sebastian, Sep. 1998, 319-26

BLECK, W. et al.

Nb Effect on Mechanical Properties of TRIP Steels

Microalloying in Steels, S. Sebastian, Sep. 1998, 327-34

SUGIMOTO, K. et al.

Cyclic Deformation Behavior of TRIP Dual Phase Steel

Metallurgical and Materials Transactions A, Dez. 1997, 2637-44

HANZAKI, A. et al.

Retained Austenite in TM Processes Si-Mn TRIP Steels

Metallurgical and Materials Transactions A, Nov. 1997, 2405-14

YUE, S. et al.

Thermomechanical Processing Effects on C-Mn-Si TRIP Steels

J.O.M., Sept. 1997, 59-61

REISNER, G. et al.

Modeling of Retained Austenite in Low-Alloyed TRIP Steels

J.O.M., Sept. 1997, 62-5, 83

SUGIMOTO, K. et al.

Fatigue-Strength of TRIP-aided Bainitic Sheet Steels

Tetsu-to-Hagane', Aug. 1998, 559-65 (ISIJ Int., Aug. 1998, A21)

FROMMEYER, G. et al.

High Strength TRIP/TWIP and Superplastic Steels

Revue de Metallurgie, Oct. 1998, 1299-310

HELLER, T. et al.

New High Strength Hot Rolled Steels - Production, Properties and Applications

Mechanical Working and Steel Processing, AIME, 1998

JACQUES, P. et al.

Development of Cold Rolled, Low Si, TRIP Steel for the Automotive Industry

Mechanical Working and Steel Processing, AIME, 1998

EBERLE, K. et al.

New TM Strategies for Realization of Multiphase Steels Showing TRIP Effect

Mechanical Working and Steel Processing, AIME, 1998

PICHLER, A. et al.

TRIP Steels with Reduced Si Content

Mechanical Working and Steel Processing, AIME, 1998

SUGIMOTO, K. et al.

Microstructure and Formability of HS TRIP Bainitic Sheet Steels

Mechanical Working and Steel Processing, AIME, 1998

PARK, S.I. et al.

Evolution at ROT Cooling Stage in Hot Rolled TRIP Steels

Mechanical Working and Steel Processing, AIME, 1998

KIM, S.J. et al.

TRIP Behavior in Hot Rolled Steel Plates Containing Tramp Elements

Mechanical Working and Steel Processing, AIME, 1998

MARUTA, A.

Advances in Automotive Steel Sheets

Steel Today & Tomorrow, July-Sept. 1998, 5-8

GRAESSEL, O. et al.

High Strength TRIP/TWIP Steels for Crash Resistance of Structural Car Body Parts

VDI, Ing. Werkstoffe 4, 1998 (St. Res., Dec. 1998, 517)

GRAESSEL, O. et al.

High Strength TRIP/TWIP Steels for Crash Resistance of Structural Car Body Parts

ISATA Autom. Ergon. Safety, 1998, 111-21 (St. Res., Dec. 1998, 518)

GRAESSEL, O. et al.

High Strength TRIP/TWIP Steels for Crash Resistance of Structural Car Body Parts

Proc. Werkstoffwoche ´98, Muenchen, 1998 (St. Res., Dec. 1998, 518)

GRAESSEL, O. et al.

Phase Transformation and Mechanical Properties of Fe-Mn-Al-Si-C TRIP Steels

J. Phys. IV France C5, 7, 1997, 383-8 (St. Res., Dec. 1998, 519)

BASUKI, A.

Effect of Deformation on Grain Refinement of Retained Austenite of TRIP Steel

Scripta Materialia, 40/9, 1999, 1003-8

ENGL, B. et al.

Materials Development as Reflected in Steels for the Automotive Industry

Forum ThyssenKrupp 1/1999, 20-5

MARUTA, A.

Advances in Automotive Steel Sheet

Steel Times International, July 1999, 26-7, 32

HAN, H.N. et al.

Cooling Behaviour of TRIP Steels on Run-Out Table of Hot Strip Mill

Modelling of Metal Rolling Processes 3, I.O.M., London, Dec. 1999

TRAINT, W. et al.

Microstructure-Property Relationships for Dual Phase and Multiphase Steel Strip